UPDATE #6 9/13: THEY ARE HERE!

Today (9/13) I received the PCB I sent out to make with Silver Circuits (http://www.custompcb.com/).  I made several boards, only one is needed per clock.

NEXT STEPS:

1) Finish populating the rest of the components on the board.

2) Finish making the display, by soldering all the 99 LEDs and resistors.

3) Write the software that will do all the logic to keep track of time and turn on the corresponding LEDs.

4) Test, Debug and Fix

Here are the boards as the arrived

Here is one board with some of the components already in place.